Red light integrated machine of optical power meter
1. overview
Adn100 optical power meter red light integrated machine is a new two in one test instrument independently developed for the needs of the actual project. It is a combination of optical power meter and red light source. The optical power meter and red light source can be used at the same time or separately.
The optical power module is equipped with seven wavelength calibration points of 850nm, 980nm, 1300nm, 1310nm, 1490nm, 1550nm and 1625nm. It can display optical power in linear (MW, UW) and logarithmic (DBM). It can be used not only for direct measurement of optical power, but also for relative measurement of optical link loss.
The red light source module provides 650nm visible laser output, which is suitable for the measurement of single-mode or multi-mode optical fiber. The red light emitted by them can be emitted from the position where the optical fiber is severely bent, the breakpoint of the covering layer or the bare fiber, or from the joint where the connection is not good. Therefore, it can identify the fault of optical jumper, jumper board, distribution frame and joint, and it can also be used for multi-core optical fiber pair.
The instrument has the features of solid shell, small volume, light weight, dust-proof design, including FC \ SC \ st three conversion head, various power supply schemes, self calibration function, portability and low power consumption, with large backlight LCD display, making the measurement work more convenient and fast. It is a good instrument for construction and maintenance in the field of optical fiber communication.
2. Technical indicators
Product model
ADN100 B (default model) D
Optical power meter module
Detector type
InGaAs
Calibration wavelength
850, 980, 1300, 1310, 1490, 1550, 1625
Measurement range (DBM)
70 ~ +6 -50~ +26
Resolution (DBM)
Zero point zero one
Measurement uncertainty (DB)
± 0.25dB (5%) @ 25 ℃ (± 0.5dB @ 850nm)
Red light source module
Light emitting device
FP - LD
Working wavelength (nm)
Six hundred and fifty
Typical value of output optical power (MW)
More than 10
Red frequency flashing function
Yes, the frequency is 2Hz
Other parameters
Power Supply
2 AA alkaline batteries (rechargeable)
Automatic shutdown time
10 minutes
Continuous working time
≥ 100 hours (single optical power meter works)
≥ 10 hours (red light source and optical power meter work at the same time)
Optical interface
Support FC, SC, St interchangeability
Working temperature (℃)
-10~ +45
Storage temperature (℃)
-20~ +65
Boundary dimension (mm)
160 * 72 * 30 (including shell in length, width and thickness); 152 * 69 * 25 (excluding shell in instrument)
Weight (g)
260 (including battery)
Explain:
1 wavelength range: specify the range of the following standard working wavelength λ from λ min to λ max. the optical power meter designed in this wavelength range works under the specified index.
2 power measurement range: it can measure the maximum optical power range according to the specified index.
Uncertainty: the error between the test result of a certain optical power and the test result of standard optical power.
3. composition
1. One red light all-in-one hand-held optical power meter
2. Sheath - one
3. Operation instruction -- one copy
3. Instrument package -- one
3. Clean the cotton swab - 1 package
4.1.5v AA battery -- two sections
